5000T infrared aluminum rod heating furnace (short rod)

Technical parameter:

Name: 5000T infrared aluminum rod heating furnace (short rod)

Aluminum rod specifications: φ380*1200mm

Production capacity: 8000KG per hour

Maximum heating temperature of aluminum rod: 530℃

Gas consumption (cubic meter per ton of aluminum rod): ≤14.1 (continuous normal production)

Gas heating capacity: 1.6 million kcal (8 pieces in total)

Total power of circulating fan: 88KW( 8 units in total)

Temperature difference between the front, middle, and rear of the aluminum rod: ≤5℃

Heat up the empty furnace to 500℃: ≤60min

Heat up the aluminum rod to 500℃: ≤120min

Exhaust gas temperature: ≤60℃

Temperature rose on the outer wall of the furnace body: room temperature +≤15℃ (excluding around the furnace door)

Noise: ≤85 Decibel

Water consumption: 0 (air cooled)

Compressed air consumption 0.5Mpa: 0.3M³/divide

Supply voltage: 380V (based on customer requirements) three phase AC power

Power supply frequency: 50 Hz (based on customer requirements)

Total weight of equipment: ~30T

Matching rod inlet and outlet system: Manipulator

Adopting infrared radiation and the most advanced and efficient axial compression jet heating technology, combined with a compact tunnel furnace, this equipment can achieve the highest heat utilization rate.

Production of aluminum material quality: After heating, the aluminum rod has the best plasticity and low deformation resistance, achieving uniform and good structural properties. It is the best heating equipment for high-end aluminum materials widely used in aerospace, aviation, military, and high-end automotive fields, such as the 7 series, 5 series, and 3 series.

Note: the above information is a regular typeφ120 bar furnace parameters, our company can produce φ80-φ380mm rod furnace, welcome to consult and customize.