1000t Machine Infrared Aluminum Rod Heating Furnace (long Rod Hot Shear)

Technical parameter:

Name: 1000T infrared aluminum rod heating furnace (long rod hot shear)

Aluminum rod specifications: φ120*6000mm

Rod discharge capacity: 13 pieces

Maximum capacity: 800KG per hour

Energy consumption:

Gas consumption during heating: ≤14.1 cubic meters of natural gas per ton of aluminum rod

Electricity consumption during electric heating: ≤ 150 kWh per ton of aluminum rod

Matching heating power: Firegun: 200000 kcal or heating tube: 150 KW

Fan power: 8KW

Thickness of insulation layer on the furnace side: 350mm

Empty furnace heating time (500 ℃): 1 hour

Heating time at full load (500 ℃) : 2 hours

Uniformity of furnace temperature in the working area:  ≤±5℃

Temperature rise on the outer wall of the furnace body: room temperature +≤15℃ (excluding around the furnace door)

Gun combustion chamber: 310S stainless steel

Optional system supporting equipment: Semi-automatic hot shear machine/Fully automatic hot shear machine/Hot saw/Independent hydraulic station

Total weight of equipment: ~13T

Adopting infrared radiation and the most advanced and efficient axial compression jet heating technology, combined with a mesh plate waste heat recovery system, this equipment can achieve the highest heat utilization rate.

Production of aluminum material quality: After heating, the aluminum rod has the best plasticity and low deformation resistance, achieving uniform and good structural properties, good process performance (easy to extrude and form), and good oxidation coloring performance.

Note: the above information is a regular typeφ120 bar furnace parameters, our company can produce φ80-φ380mm rod furnace, welcome to consult and customize.